All posts by lofwyr

Latex War Gaming Terrain Mat: The Materials

Today I made the run to our local home improvement center (called Menard’s, similar to a Lowes or Home Depot) and purchased the materials for the terrain mat.

This mat is intended mostly to represent North West Europe. I will be using it for SAGA and for various World War II games, and in various scales as well. To that end, I wanted a base color for the mat that was fairly typical of that region’s soil. I chose to use Vallejo’s Flat Earth as the base color for a couple of reasons. First, it is fairly close to a typical soil color for the places I am representing, especially after shading and dry brushing to break up the tones. Second, it is the base color I have used on my miniatures for years, and I love to be able to mask the bases of the figures as much as possible.

Obviously the cost of using Vallejo paint to cover a play mat 6 x 9 feet in dimension would be ridiculously expensive, so I used the paint departments color matching and had them make a quart of it (approximately a liter). I am hoping this will be enough, but if it is not, it should be easy enough to get another.

The finished mat will be 5 x 8 feet, so I selected a heavy duty canvas drop cloth to use as the base. There were a wide variety of sizes available, and one could create an absolutely huge terrain mat if they desired. The best size for me was the 6 x 9, allowing me a foot to cut off the outside when I am done.

Then came the caulking. It took some digging to find the latex acrylic caulking that did not have silicone added to it. I was not sure if the addition of silicone would affect the paint or not. I suspect it would not matter, but finding latex acrylic caulk without it saved me the worry. I probably bought more than needed, but have plans to make a desert mat if this works out well, so I can save it for that project.
mat1

The list of materials with cost breaks down like this:
1 6 x 9 Canvas Painters Drop Cloth $9.50
1 Quart of Latex Enamel Interior House Paint matched to Vallejo Flat Earth $10.50
6 Tubes of Latex Acrylic Caulk $1.74 each, so $10.44

Materials not pictured, but either free for me, or things I already have on hand:
A copious amount of sand, free from the driveway.
A wide variety of flocking of differing shades and textures.
A putty knife.
A large wooden table which I can leave the cloth attached to while I work.

My total cost so far is about $30, and I do not foresee much more expense. If it works out well, it should be a fairly flexible and cost effective terrain mat, and with any luck, it will look good too.

New Terrain Mat In The Works

So we make items for war gaming for a living, but the road to doing so was paved with years of being hobbyists ourselves. To that end, we still play when we can, and with a large basement we always had the luxury of a space for a huge table.

That said, at some point soon we will be empty-nesters (our youngest is done with school in a couple months) and we are looking towards moving somewhere warmer, somewhere where it will not be below freezing and snowing as late as May. On that front, I have been thinking a lot about how to down-size my war gaming hobby, while still keeping the flexibility of excellently modeled and good looking terrain. Enter the solution: Acrylic latex terrain mats.

Made from painter’s canvas drop cloth, some tubes of acrylic caulking, latex house paint, sand from the driveway, and flocking from a wide variety of sources (both homemade and purchased) and apparently a good deal of patience, I will begin working on this project and putting up posts here detailing my own experiences with the project.

I am sourcing a wide variety of tutorials for this, but the most instrumental in pushing me to do this, and the one I am following closely, can be found here:

http://tobispaintpot.blogspot.de/2012/10/a-new-horizon-tutorial-for-flexible.html

I doubt I could improve at all on this fantastic walk-through, and do not really aspire to, but thought I should point this out to anyone who might be interested in this project, and considering attempting it themselves. I would love to hear about your experiences with it as well. A special word of thanks to Tobi’s Paint Pot, an excellent blog.

Frostgrave…Where tabletop war games and role playing games meet.

Our small group has been, and will always be gamers. We love them all. Board games, miniature games, cooperative games, and especially role playing games. As such, we are always looking for new games to enjoy, and in so doing we have been delighted to dip–well, plunge–into Frostgrave.

It is a miniature skirmish game set in the fantasy city of Frostgrave that was destroyed by an ancient, and very magical apocalypse. Covered for thousands of years in ice and snow by the magical nature of the war that destroyed it, wizards are now bringing war bands into the city to uncover ancient and lost secrets. If it sounds familiar, it is very much like Mordheim.

It is an amazing blend of what makes a miniature skirmish game and a role playing game fun. Designed for no more than 10 miniatures per war band (and you can readily use any miniatures you might already have on hand), it is easy to get new people in to, plays quickly and intuitively, and is a lot of fun. We would encourage you to look into it.

On our end, we love to support the games we love, and this is one of them. We will be adding products to our store in the coming weeks that we use to enhance our own playing of this great little game which bears a great deal of promise.

If you are interested in our tokens and products we designed with our own play of this game in mind, please feel free to have a look:

Kraken Skulls products compatible with Frostgrave

A couple of fun apps for Fantasy Tabletop RPG gamers

I am a long time DM for various tabletop RPGs. Two things that add flavor to a game are weather and a good tavern, both of which occur with regular frequency for the average D&D party.

As such, I am sharing a couple of links to my Kraken Skulls business partner Grant’s weather generator app and tavern generator (the tavern generator is definitely designed around D&D 5E but useable for many games). Both are easy, intuitive, fun, and free. So if you are a tabletop role player, and especially a GM, enjoy!

Tavern Generator:
http://ratherbegaming.net/apps/tavern_gen/

Weather Generator:
http://ratherbegaming.net/apps/weather_gen/index.php

Enjoy!

Happy New Year Ox Carts!

We have added the first of a small collection of ox and horse drawn carts, all in 28mm scale. While made with the fantasy RPG and wargamer in mind, these carts will also work for many historical gamers. We simply did not want to advertise them as historical, because they are not modeled specifically from historical examples.

Thanks for having a look, and hope the New Year brings you an ox cart full of good times!

https://krakenskulls.com/product/two-wheel-medieval-fantasy-ox-cart/

Gaming Status Tokens Coming!

blind2
We are in the process of adding a line of tokens for tabletop miniature and role playing games. They will be cut from a mix of different media, to include glass beads, acrylic sheet, and wood. The first one we have added is “Blind,” pictured here and available in our shop. Others we intend to add are:

Charmed
Deafened
Frightened
Grappled
Incapacitated
Invisible
Paralyzed
Petrified
Poisoned
Prone
Restrained
Stunned
Unconscious

If you have any other suggestions or token ideas you would like to see for your tabletop, feel free to post a reply here and let us know and we would be happy to add them.